Heat pump installation cost calculator
Angi reports a 2026 national average of $6,087 for heat pump installation, based on 4,719 projects, with most between $4,236 and $7,942. Enter your home size to see the published range for a matching unit.
Air-source heat pump cost by home size
| Source | Capacity | Home size | Installed cost |
|---|---|---|---|
| Angi | 2 ton | 1,000 sq ft | $3,500–$5,500 |
| Angi | 2.5 ton | 1,500 sq ft | $3,700–$5,800 |
| Angi | 3 ton | 2,000 sq ft | $3,900–$6,200 |
| Angi | 3.5 ton | 2,500 sq ft | $3,900–$6,400 |
| Angi | 4 ton | 3,000 sq ft | $4,000–$7,300 |
| Angi | 5 ton | 3,500 sq ft | $4,500–$8,800 |
| HomeGuide | 1.5 ton | 600–1,100 sq ft | $4,000–$6,000 |
| HomeGuide | 2 ton | 900–1,400 sq ft | $5,000–$7,000 |
| HomeGuide | 2.5 ton | 1,200–1,600 sq ft | $5,500–$8,000 |
| HomeGuide | 3 ton | 1,500–2,100 sq ft | $5,700–$8,500 |
| HomeGuide | 3.5 ton | 1,800–2,300 sq ft | $6,000–$9,000 |
| HomeGuide | 4 ton | 2,100–2,700 sq ft | $6,500–$11,000 |
| HomeGuide | 5 ton | 2,500–3,500 sq ft | $7,000–$12,000 |
What drives the price
- Cold-climate equipment: Angi lists $2,000–$5,000 more for a system designed for freezing temperatures.
- Ductwork: Angi puts new ductwork at $2,000–$7,500.
- Breakdown: HomeGuide splits a typical job into unit $1,500–$7,000, labor $2,000–$3,500, permits/inspections $100–$300, electrical $200–$500, refrigerant $75–$150, thermostat $25–$250.
Angi's page does not spell out what its size table includes, and HomeGuide's figures run higher at every size. If the heat pump will carry your whole heating load or needs new ducts, plan toward the HomeGuide figures plus extras. Sizing here follows each source's own square-foot table; a contractor's load calculation (Manual J) should set the real size.
Sources
- Angi, How Much Does a Heat Pump Cost? [2026 Data]. Page date: 2026-10-28. Accessed 2026-11-21.
- HomeGuide, How Much Does an Air-Source Heat Pump Cost? (2026). Page date: 2025-12-05. Accessed 2026-11-21.